161 tools for universal use in ABS thermoformed trays :
- combination wrenches 6÷21 mm
- combination wrenches 22 – 24 – 27 – 30 – 32 mm
- pin punches Ø 2 – 3 – 4 – 5 – 6 mm
- centre punch Ø 4 mm
- double open end wrenches 6×7 – 8×9 – 10×11 – 12×13 – 14×15 – 16×17
18×19 – 20×22 – 21×23 – 24×26 – 27×29 – 30×32 mm - offset hexagon key wrenches 1,5 – 2 – 2,5 – 3 – 4 – 5 – 6 – 8 – 10 mm
- double ended offset ring wrenches 6×7-8×9-10×11-12×13-14×15-16×17-18×19 mm
- offset hexagon key wrenches 2-2,5-3-4-5-6 mm
- drivers for Torx® head screws, with handles T10-T15-T20-T25-T27-T30
- 1/2″ square drive hexagon sockets 10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-26-27-30-32 mm
- 1/2″ drive, socket drivers for hexagon screws 5-6-8-10-12 mm
- 1/2” wobble extension bar 125 mm
- 1/2” wobble extension bar 250 mm
- 1/2″ drive universal joint
- 1/2″ drive sliding T-handle 305 mm
- 1/2″ drive reversible ratchet
- 1/4″ hexagon sockets 4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm
- 1/4″ socket drivers for hexagon screws 2,5-3-4-5-6-8 mm
- 1/4” drive extension bar 50 mm
- 1/4” drive extension bar 150 mm
- 1/4″ drive universal joint
- 1/4″ drive spinner handle
- 1/4″ drive swivel T-handle 115 mm
- 1/4″ reversible ratchet
- Heavy-duty diagonal cutting nippers 160 mm
- half-round needle nose pliers 180 mm
- Extra-long needle nose pliers 160 mm
- circlip pliers straight, internal 180 mm
- circlip pliers bent, internal 170 mm
- circlip pliers straight, external 175 mm
- circlip pliers bent, external 175 mm
- Slip joint pliers boxed joints 250 mm
- self – locking pliers 240 mm
- screwdrivers for cross head Phillips® screws 2,5×50-3×75-3,5×100-4×125-5,5×100-5,5×150-6,5×150 mm
- screwdrivers for cross head Phillips® screws 8×150-8×200-10×200 mm
- screwdriver for slotted head screws, extra-short series 4×30-6,5×30 mm
- screwdrivers for cross head Phillips® screws PH0x60-PH0x100-PH1x80-PH1x120-PH2x100-PH2x150 mm
- screwdrivers for cross head Phillips® screws PH3x150-PH4x200 mm
- screwdriver for cross head Phillips® screws, extra-short series PH1x30-PH2x30 mm
- flat chisels, ribbed type 100-200 mm
- engineer’s hammer 300 g
- soft face hammer Ø 35 mm
- second-cut square files 200 mm
- second-cut triangular files 200 mm
- second-cut flat files 200 mm
- second-cut half-round files 200 mm
- second-cut round files 200 mm
Rezensionen
Es gibt noch keine Rezensionen.